This is how you change the bracelet on your Fitbit watch

The Fitbit bracelet can be removed and/or replaced in just a few simple steps. Source: https://stock.adobe.com/ / By A. Aleksandravicius

Even a Fitbit bracelet doesn’t last forever, it can use a good cleaning or perhaps you would like to create a completely individual bracelet. The Fitbit bracelet can be removed and then replaced in just a few simple steps. In this guide we will explain to you how to easily remove the bracelet.

How do I change the Fitbit bracelet?

Depending on the Fitbit model, the way you remove the bracelet may differ. If in doubt, it’s best to check your Fitbit’s operating instructions. We summarize the steps for the most common models.

Fitbit Versa: replace the bracelet

You can easily replace the bracelet on your Fitbit Versa. The bands are equipped with a ‘slider’ with which you can easily change the band

1. Lay your smartwatch so that the back is facing up. You will now see a horizontal pencil on each side.
2. Push the pin to the side and you can pull the band out of the watch. Sometimes the pin can stick a bit due to contamination.
3. Repeat this process on the other side.
4. Carefully clean the area of ​​the band. Best with a cotton swab.
5. Take the new band, pull the pin backwards and simply click it back in. If you listen closely you will hear the click and the band should be tight.
6. However, make sure the Fitbit Versa band is secure and secure before putting it back on your wrist.

This is how you replace the bracelet on your Fitbit Versa.

You can also find illustrated replacement instructions for all Fitbit models on the Fitbit help page.

Fitbit Versa 3 and Fitbit Sense: Change the bracelet

According to Fitbit, the Versa 3 and the Sense are equipped with probably the easiest system for changing the bracelet.

1. Place the watch so that the back is facing up.
2. You should now see that the Fitbit has a horizontal button on each band holder. Gently push it towards the bracelet to release it. Sometimes this can get a bit stuck due to contamination.
3. Once the bracelet parts are loosened, you can first carefully clean the watch.
4. Now simply insert the new bracelet into the corresponding openings. You will hear a quiet click when they click firmly into place.
5. However, check again carefully whether the bracelet is tight and holds everything securely.

Fitbit Charge: Change bracelet

1. Turn the Fitbit over so that the heart rate sensors are facing up. On the smartwatch you will see a button on both sides.
2. Gently press this button to release the Fitbit Charge 3 band.
3. Simply press the button and pull off the band at the same time. You don’t have to pull it hard.
4. Now attach the new bracelet: Make sure that the side with the buckle on the clasp of the band is facing upwards. You can see this by the Fitbit logo on the bottom of the device.
5. Make sure the ribbon is secure and secure.

For these and all other models, you can find illustrated removal instructions on the Fitbit help page.

How do you wear Fitbit when it’s not on your wrist?

Even though the Fitbit is primarily a smartwatch, the device can also be worn on clothing as a simple watch or tracker. To do this, you need the appropriate clip accessories for your respective Fitbit.

With the clip you can then wear the watch on your bag, on your belt, on your sportswear or in your jacket, if you prefer. However, the Fitbit will not be able to fulfill all of the existing functions because the sensors are covered by the clip.

How do you wear the Fitbit correctly?

To wear your Fitbit properly and get accurate readings, place it on your non-dominant wrist. The Fitbit should sit about 1-2 finger widths above the wrist bone, especially if you want to measure your heart rate. Make sure it fits snugly enough to stay in place, but is still comfortable.

This ensures stable and accurate heart rate measurement. In everyday life, you can wear the Fitbit a little looser so that your skin can breathe. However, make sure it is tight enough to collect reliable data.

Also remember to clean your Fitbit and band regularly, especially after exercise or if it gets wet.

In the official Fitbit shop you can buy clips for your Fitbit model for various models.

Can Fitbit be worn on the ankle?

Fitbit devices are primarily designed to be worn on the wrist to ensure accurate measurements. If you’re considering wearing your Fitbit on your ankle, keep in mind that this may affect the accuracy of the data.

The optical sensors on most models are specifically designed to measure heart rate on the wrist. The sensors on the ankle could therefore not function correctly and provide inaccurate measurements. You will achieve the best results if you wear the device on your wrist as recommended.

How do you wear a Fitbit at night?

To properly wear your Fitbit at night and capture accurate sleep data, you should wear it on your wrist, just as you would during the day. Make sure it fits comfortably and not too tightly so that the skin can breathe and there are no pressure points. However, a band that is too loose can affect heart rate and sleep phase measurements.

If you have sensitive skin or are prone to irritation, we recommend cleaning your Fitbit and bracelet regularly to remove sweat and dirt. Wearing the Fitbit on the other side of your wrist, more on the underside of your arm, can also increase comfort, especially if you spend a lot of time sleeping on your side.

Hand on heart: How often do you change or clean your Fitbit bracelet? Have you developed a routine to make sure it’s always clean? Do you have the original bracelet or did you order your own, customized one? Did the tips help you or did we forget something? Feel free to share your tips and experiences with us in the comments – we’re excited!